×

Newsletter


Analysis of Transients in Power Systems

September 25-29, 2017

Madison, WI, USA

 

Language: English

Fees:  $ 2 395* 

More information*

The registration is on the website of the University of Wisconsin-Madison

 

Overview:

Why do power system disturbances occur? How do you find the culprit of transient events? Can you analyze the complexities of the electric power system?

Learn to predict the outcome of transient events on power systems.  Construct model power systems, apply transient events, and analyze the power system effects.  Design mitigation options and compare effectiveness of the options.

If you are familiar with power systems, you will benefit. The case study approach introduces the various families of transients. It will also develop an in-depth understanding of the phenomenon.  If you have a more detailed transients background, you will expand your knowledge. Participate in exercises using the tool EMTP-RV. We will provide classroom computers. Attendees will receive time-limited access to the current version of EMTP-RV.

 

Course Highlights:

  • Introduction to the modeling tools for power systems analysis
  • Introduction to EMTP-RV using example case studies
  • Power system stability studies and electromechanical oscillations
  • Insulation coordination of a 230 kV transmission system
  • Analysis of unbalanced systems
  • HVDC systems
  • Renewable energy studies
  • Statistical and parametric studies

Prior experience with EMTP is not required.

 

Engineering personnel familiar with the basics of electric power system analysis who need to get more in-depth knowledge of the analysis and simulation of power system transients in areas including:

  • Insulation coordination of HV substations and transmission lines
  • Rotating machines dynamics
  • Application of power electronics and associated controls in power systems
  • HVDC and FACTS equipment
  • Distribution system and power quality studies
  • Wind power generation and interface issues

 

Outline

Theoretical Backgrounds on Power Systems and Transients

  • Mathematical representation of power systems
  • Power transmission concepts

 

Introduction to Power Systems Analysis and Modeling Tools

  • Short circuit and harmonic analysis
  • Time domain methods
  • The range of problems and frequencies: lightning, switching, and temporary overvoltages; electromechanical transients
  • What EMTP-RV can do

 

Introduction to EMTP-RV and EMTP Works Using Examples

  • Overview: devices, pins, and signals
  • Power and control devices
  • Basic scripting techniques
  • Transients due to fault: simple and complex modeling
  • Capacitor switching
  • Inrush
  • Ferroresonance

 

EMTP-RV Simulation Options

  • Load flow, steady-state analysis, and initialization
  • Time-domain computations
  • Solution of nonlinear devices

 

Creation and Maintenance of Subnetworks

  • Subnetwork uniqueness, masking, hierarchy
  • Symbol editor
  • Password protection

 

Creation and Maintenance of Libraries

  • Available libraries
  • Searching for devices

 

Simulation of Control Systems

  • Measuring devices: power, voltage, current
  • Periodic meters, transformation functions
  • User-defined modeling
  • Examples: mean-value model, measuring power with variable frequency, variable inductance mode

 

Switching Device Models

  • Simulation of power electronics devices
  • Power converters and switching devices

 

Transmission/Distribution Line and Cable Models

  • Theory and available models
  • Pi-section, constant parameter model, frequency dependent models
  • Corona model
  • Application examples

 

Three-Phase Power-Flow

  • Methodology and setup options
  • Initialization

 

Transformer Models

The Study of a Complete System

  • From load-flow to steady-state to time-domain
  • Switching transients
  • Temporary overvoltages
            

Power System Stability Studies: Electromechanical Oscillations

  • Exciter, governor and stabilizer models
  • Load model designs and applications
  • Transmission case study
  • Synchronous machine synchronization

 

Statistical Analysis Methods and Parametric Studies

Wind Plant Modeling

  • Grid integration studies
  • Protection studies
  • Control optimization
  • Synchronous vs. asynchronous machine models

 

Steady State Analysis of Unbalanced Distribution Systems

  • Quick overview of distribution systems
  • Multiphase load flow, short circuit, and fault flow
  • Study of IEEE distribution test feeders and assessment of errors due to topological assumptions

 

DG Integration Studies: Solar Panels

  • Circuit-based models and average models
  • Protection strategies
  • Control options
  • Impact studies: harmonics, voltage stability, transients, short circuit contribution
  • Interaction with network protectors in grid and isolated network configurations

 

HVDC Transmission Modeling

  • Voltage-source vs. current-source converters
  • Overview of Modular Multilevel Converters (MMC)
  • Control system modeling

 

Insulation Coordination Principles

  • Voltage stresses within the system
  • Power frequency insulation and pollution
  • Lightning, switching, and temporary overvoltages
  • Lightning arrester selection
  • Insulation coordination methodologies

 

Insulation Coordination of a 230 kV Transmission System

  • System setup
  • Power-flow and steady-state stability of the system
  • Statistical switching studies and line insulation
  • Temporary overvoltages, usage of line arresters and reclosing resistors
  • Ferroresonance and harmonic resonance
  • Lightning protection of substations

 

Practical Power System Studies

  • Insulation coordination of a 230 kV GIS
  • Transformer and capacitor bank switching
  • Temporary overvoltage cases – load rejection, self-
  • excitation, etc.
  • TRV studies
  • Breaker failure analysis with detailed arc model


Instructors:

Douglas Mader, PE, Engineering Consultant

Doug Mader received his education at the Technical University of Nova Scotia (now part of Dalhousie University) where he received his Bachelors Degree in Electrical Engineering with Distinction in 1973. He began his career at the Nova Scotia Power Corporation upon graduation and gained his Professional Engineer status in 1975. During his career at NSPC he rose to the position of Vice President Engineering of NS Power Services, the unregulated consulting subsidiary of Nova Scotia Power. He moved to Entergy Transmission Business in June of 1998 as Director Value Engineering, and in 2000 took over responsibility for all Transmission Business Engineering, Project Management, and Construction functions. In January of 2004 he was appointed Director, Technology Delivery and Business Unit CIO for Entergy transmission, and in 2007 Director if IT Infrastructure and Enterprise Services for Entergy Corporation. Mr Mader retired from Entergy in April 2014 and is now a private consultant to the electric power industry.
Teaching in courses starting: 09/25/2017

 

Jean Mahseredjian, Professor

Jean Mahseredjian is currently a professor at École Polytechnique de MontrÉal. He brings with him more than 20 years of research and development experience, having spent 17 years at the Institut de Recherche d’Hydro-QuÉbec (IREQ) specializing in electromagnetic transient simulation and analysis. Jean is the creator and main developer of EMTP-RV. Additionally, he served as chairman of the International Conference on Power Systems Transients (IPST 2005) in Montreal and was technical co-chairman of IPST 2007 in Lyon, France.
Teaching in courses starting: 09/25/2017


 

Bulent Sarlioglu, PhD, Asst Professor & PGM Director

Bulent Sarlioglu is an assistant professor at the University of Wisconsin–Madison and the associate director of the Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC). He previously worked at Honeywell International Inc.'s aerospace division for 11 years, most recently as a staff systems engineer, earning Honeywell's technical achievement award in 2003 and an outstanding engineer award in 2011. Bulent’s expertise includes electrical machines, drives, and power electronics and he is the inventor or co-inventor of 15 US patents as well as many international patents. He received his PhD from University of Wisconsin–Madison, MS from University of Missouri–Columbia, and BS from Istanbul Technical University, all in electrical engineering.

Teaching in courses starting: 09/25/2017

 

Location:

PYLE CENTER
702 Langdon Street 
Madison, WI 53706

 


Contact:

David COTTINI | d.cottini@powersys-solutions.com | Tel: +1 727 288 8100 

POWERSYS | Software & Services

2 000 Town Center - Suite 1900
Southfield, MI 48075
USA